Trolley-Case Pulsed Laser Cleaning Machine
A retractable-handle case with MOPA precision for field service technicians working alone.
View model
All-in-One Portable Laser Cleaner
300W Portable Suitcase Pulsed Laser Cleaning Machine
A complete laser cleaning system in one wheeled case. Roll it to the workpiece, plug it in and switch on; the pulsed beam lifts resin, oil, dirt, rust, coatings, plating and paint off the surface without a chemical, a drop of water or a grain of abrasive media. At 45 kg with a handheld head and manual focus, it is the machine that goes where the work already is — a mold on the press, a fitting in the yard or a stone carving in the studio.
100–300WPulsed power range
45kgAll-in-one weight
15Interface languages
0Water, media, chemicals
Field Deployment
From the Van to the Workpiece in Four Steps
The suitcase format removes the crane, the crane permit and the setup day that a fixed cleaning station would need.
01
Roll It In
The case rolls on its own castors and fits through a standard doorway, so one technician moves the whole system.
02
Connect the Head
Attach the handheld laser head and the integrated fiber cable, then set the manual focus for the working distance.
03
Switch On
Plug into mains power and start. No chiller to fill, no media to load, no chemical to mix or neutralize.
04
Clean and Move On
Work through the task and roll the case to the next location — nothing to drain, empty or clean down.
All-in-One Architecture
Source, Cooling and Control in One Case
Separating the laser source from the chiller is what makes conventional laser cleaners heavy and awkward. This machine integrates the source, the air-cooling path and the control panel into a single housing so the whole system travels together.
- Higher energy-conversion efficiencyThe fiber source turns more of the input power into cleaning energy, reducing heat that has to be dissipated.
- Compact air-cooling pathA dense cooling structure shrinks the envelope, which is what makes the machine genuinely portable.
- Fully integrated fiber designThe optical path is sealed and aligned at the factory, so the system runs maintenance free in normal use.
- Manual focusThe operator sets focus for the surface in front of them, which keeps curved and awkward parts within the process window.
Core Advantages
Four Reasons the Suitcase Format Works
Portability is not the only benefit. The process itself removes waste and risk from the cleaning step.
Non-Contact Cleaning
The beam lifts contamination without touching the part, so the base material and its surface finish are preserved.
Targeted Cleaning
Clean a defined zone or a precise dimension on the part instead of treating the whole component.
No Consumable Supply Chain
No chemicals, no disposable media and no water supply to arrange at the work site.
Energy-Efficient Source
High electro-optical conversion efficiency keeps the cabinet cool enough for air cooling, with no chiller unit to carry.
Key Numbers
Portable Without Giving Up Capability
The figures that describe how the suitcase machine performs away from a fixed cleaning station.
45kgTotal system weight
100–300WPulsed power range
15Interface languages
2yrLaser source warranty
A
Handheld Laser Head
Slim, dust-resistant and comfortable for long sessions, so an operator can work the surface without fatigue.
B
No Water Circuit
Nothing to fill, drain or freeze, which matters when the machine is stored in an unheated workshop or van.
C
15-Language Interface
One machine serves a multilingual team, and the language can be changed by the operator on shift.
Material Coverage
What It Cleans and What It Protects
The pulse energy is absorbed by the contamination and not by the substrate, which is why the machine can be used on surfaces that abrasives would ruin.
- MetalsSteel, stainless, aluminium, copper, brass and castings, for rust, oxide, oil and coating removal.
- Molds and toolingResin, mold release agent and burnt polymer removed from cavities without rounding the edges.
- Stone and masonryDirt, soot and biological growth lifted from carved and polished stone without scarring.
- TimberPaint and carbon deposits stripped from wood before the fibers char, when short pulses are used.
- Heritage artifactsGentle cleaning of bronze and other delicate surfaces where material must not be lost.
Contaminant Matrix
What Comes Off, and What the Surface Looks Like After
Settings are matched to each contaminant, and the machine stores them so the same result repeats on the next part.
| Contaminant | Effect of the Pulsed Beam | Resulting Surface |
|---|---|---|
| Resin and release agent | Vaporized from cavities and vents without abrasive scrubbing | Clean tooling surface, edges unchanged |
| Oil and grease film | Removed at low power with a fast scan | Dry, weld-ready metal |
| Light rust and oxide | Ablated in a single pass at moderate power | Bright metal with the original profile |
| Coatings and plating | Removed layer by layer, stopping at the substrate | Bare metal, no masking needed |
| Paint and primer | Stripped at higher power or with a slower traverse | Uniform finish ready for recoating |
| Dirt and stains on stone | Lifted from the surface without cutting into it | Original texture preserved |
Power, scan speed and focus are set per contaminant. Send a sample and we will return it cleaned with the parameter set recorded.
Applications
Where a Suitcase Laser Cleaner Earns Its Keep
Field service, tool rooms and restoration workshops all share one need: bring the process to the part.
A
Tool Room & Molds
Clean molds on the press or on the bench, removing resin and release agent without dismantling the tool.
B
Weld Preparation
Strip oil and oxide from the joint area immediately before welding to prevent porosity and lack of fusion.
C
Restoration & Heritage
Remove dirt, soot and corrosion from stone, timber and bronze while preserving the original surface detail.
Ordering & Support
Delivery, Packing and Aftercare
Export packing is built for long sea freight, and support follows the machine to your site.
Export Packing
Full film protection and anti-collision edging inside a fumigation-free plywood crate, strapped to a pallet.
Container Loading
Full 20GP and 40GP loading is arranged for volume orders, with EXW, FOB, CIF and DDP options.
Warranty
One year on the complete system and two years on the laser source, plus lifetime technical support.
Response Time
Sales and engineering replies within 12 working hours, with video support for setup questions.
- Free sample testSend a contaminated part and we return it cleaned, with the parameters that produced the result.
- Volume termsAgreed per order against quantity and destination — send your target volume and port.
- OEM & ODMCase branding, interface language and documentation can be adapted to your market.
- Option listSpare protective windows, focus lenses and extended fiber cable lengths are specified per order.
FAQ
Suitcase Laser Cleaner Questions
Resin, oil, grease, stains, dirt, rust, oxide, coatings, plating and paint. The pulsed beam lifts contamination off the surface without touching the base material, so it also suits molds, heritage artifacts, stone and timber.
No. The unit is air-cooled and uses no chemical cleaning agent, no abrasive media and no water. You plug it into mains power, switch on, and the cleaning process starts with the handheld head.
The control system supports 15 languages, including English, Simplified and Traditional Chinese, Japanese, German, Korean, French, Polish, Hungarian, Italian, Spanish, Portuguese, Dutch, Slovak and Croatian, so a global team can operate the same machine.
The all-in-one design puts the laser source, cooling and control in a single case that rolls to the job. Setup is a matter of positioning the case, connecting the handheld head and cable, and switching on; no chiller filling or media loading is required.
Yes. The low-energy pulse leaves the base surface intact, which is why the machine is used on injection molds, carved stone and heritage timber as well as metal. A sample test confirms the settings for your material.
The unit is wrapped and fitted with anti-collision edge protection, then packed in a fumigation-free plywood crate on a pallet secured with steel straps. Full 20GP and 40GP container loading is available, and EXW, FOB, CIF and DDP terms can be arranged.
The complete system carries a one-year warranty, with the laser source covered for two years. Consumable optics such as the protective lens are wear parts, and lifetime technical support is included with every machine.
Related Models
Other Portable and Precision Cleaners
If your work needs a different carry format or more power, these models from the same range are the nearest alternatives.
Backpack Pulsed Laser Cleaning Machine
Wearable MOPA system for scaffolding, towers and confined spaces that wheels cannot reach.
View model
Water-Cooled Precision Laser Cleaner
500W to 1000W water-cooled output with Sa3.0 cleanliness for long production shifts.
View model