Deluxe Ink Wheel Sealing Machine FRD-980AIII
Floor-standing deluxe ink wheel sealer with a detailed heating, cooling and embossing sequence.
View model
Deluxe Horizontal Sealer & Coder
Deluxe Horizontal Ink Wheel Sealing Machine FRD-980AI
Seal it flat, code it clean. The FRD-980AI runs the bag horizontally so the seam is fully supported, then cools the film before it leaves the machine. The result is a flat, wrinkle-free seal with a crisp code embossed straight into the seam.
0–24m/min speed
10 mmSeal width
0–300°CTemperature
20.5 kgNet weight
Flat, Supported, Crisp
Seal and Code Without a Second Machine
Running the bag horizontally keeps the whole seam in contact with the conveyor, so there is nothing for the film to sag over. A cooling fan then pulls the heat out before the bag reaches the take-off, and the ink wheel presses the code while the seam is still soft enough to hold it.
- Cooling fanProtects the film from wrinkling and freezes the seam shape before the bag leaves.
- Adjustable temperature and speedOne machine covers thin film and heavier composite bags.
- Embossed charactersNumbers and letters are pressed into the seam, so the code cannot rub off.
- Durable heater and driveComponents built to resist wear through long production runs.
Technical Data
Datasheet: FRD-980AI Deluxe Build
Values below come from the machine datasheet for the standard FRD-980AI configuration.
| Parameter | Specification |
|---|---|
| Model | FRD-980AI |
| Power supply | 220V/50 Hz or 110V/60 Hz |
| Energy consumption | 60 W |
| Heating power | 280 W x 2 |
| Sealing speed | 0-24 m/min |
| Sealing width | 10 mm |
| Temperature range | 0-300 C |
| Conveyor load | 5 kg or less |
| Dimensions | 860 x 410 x 375 mm |
| Net / gross weight | 20.5 kg / 30.5 kg |
Exclusive Diagram
Cooling Air Stops the Wrinkle
Most sealing faults on thin film happen after the heat, not during it. Here is what the fan prevents.
No Wrinkling
Uncooled seams draw together as they set and pull the film into wrinkles. The fan sets the seam while it is still flat.
No Distortion
Thin film can stretch under residual heat. Controlled cooling keeps the bag the shape it went in.
Sharper Code
A seam that sets evenly holds a sharper embossed character, which matters when the code has to be read.
Exclusive Diagram
Sealing and Printing in One Continuous Pass
From load to discharge, the bag never stops and never changes station.
01
Bag Lies Flat
The bag is placed horizontally on the conveyor, aligned with the mouth against the band.
02
Heat Is Applied
The band carries the mouth through the heating zone where the film is softened evenly.
03
Air Cools the Seam
The cooling fan pulls heat from the seam so it sets flat and does not wrinkle.
04
Wheel Embosses
The ink wheel rolls the code into the cooled but still workable seam, then the bag is discharged.
Core Strengths
A Deluxe Build for Demanding Film
Four features that separate the FRD-980AI from a basic band sealer.
01
Horizontal Support
The bag is fully supported along its length, which keeps wide and heavier bags tracking straight.
02
Active Cooling
A dedicated fan removes residual heat, the single biggest cause of wrinkling on thin film.
03
Tunable Settings
Speed and temperature are both adjustable, so switching bag material is a settings change, not a rebuild.
04
Do Two Jobs at Once
Sealing and printing happen together, so no separate coder takes up floor space downstream.
Key Numbers
The FRD-980AI in Four Values
What the deluxe build does, in numbers you can check against your line.
24m/minTop sealing speed
10mmSeal width
300°CMaximum temperature
60WEnergy consumption
Where It Runs
Packing Rooms That Value a Clean Seam
The deluxe horizontal layout suits any operation where appearance and code legibility matter as much as seal strength.
- FoodRetail bags and pouches where the seal is seen by the customer and the date must be readable.
- PharmaceuticalsBags and pouches coded with lot and expiry data in a single pass.
- Daily chemicalsSoaps, detergents and personal care refills closed and dated without a second coder.
- ChemicalsComposite bags sealed and marked where the seam has to survive handling and storage.
FAQ
FRD-980AI Questions
The cooling fan settles the seam before the bag leaves the machine, which stops thin film wrinkling and keeps the printed code crisp rather than smeared.
The ink wheel embosses simple numbers and letters into the seam, such as dates, batch numbers and short codes. Sealing and printing happen in a single pass, so the bag is finished when it leaves.
In horizontal operation the bag lies flat on the conveyor, which gives the best support for wide or heavy bags and keeps the seam straight as it feeds through.
Yes. Both are adjustable so the machine can be tuned to different bag materials, from thin film to heavier composite bags, without changing hardware.
The heater and the drive mechanism are built for long service and are designed to resist wear during normal running, which keeps the machine productive between services.
Standard production takes about 5 working days. Air express adds roughly 4-6 working days, and the shipment is trackable from dispatch.
The machine carries a 2-year free warranty covering parts, with free replacement components and English online support for the life of the machine.
Related Models
Close Relatives of the FRD-980AI
Three machines that share the ink wheel concept but change the frame or the throughput.
Ink Wheel Coding Sealing Machine FRM-980LD
Same coding principle on a differently framed machine, tuned for sharp character definition.
View model
Multi-Function Horizontal Continuous Sealing Machine CBS-1100H
A wider, higher-power horizontal machine for heavy bags and higher throughput lines.
View model