• Shipping to 80+ countries
  • Request a Quote
  • Electric Impulse Pedal Sealer

    Floor-Standing Foot Sealing Machine PFS-350JT

    A pedal sealer that heats only when you ask it to. The PFS series uses impulse heating, so the bar is cold between bags, and the foot pedal keeps both hands on the film. Four seal lengths cover everything from small pouches to wide bag-making work.

    350–800Seal length (mm)
    1200–1800Power (W)
    110–220Volts AC
    CECertified
    Heat Only When Needed

    Cold Between Bags, Hot at the Seam

    A continuous sealer keeps its bar hot all shift, whether or not a bag is present. An impulse sealer is the opposite: current flows only during the seal cycle, the bar heats for a moment and then cools. The result is less energy, less risk of scorching, and a machine that is safer to leave running.

    • Electric impulse heatingThe bar heats only for the seal, giving a clean finish and a fast cycle.
    • Foot pedal controlThe operator presses the pedal with a foot, so both hands stay on the film.
    • Floor-standing frameA stable base puts the sealing bar at working height for a standing operator.
    • CE markedThe machine is CE certified for use in workshops and stores.
    PFS-350JT pedal operated impulse sealing bar
    The pedal frees both hands, which is why this format dominates hand-fed sealing.
    Exclusive Diagram

    Four Seal Lengths on One Platform

    Pick the bar length that matches the widest bag you run. Everything else on the machine stays the same.

    Model comparison of the PFS floor-standing foot sealing machine
    ModelSeal lengthPowerBest for
    PFS-350JT350 mm1200 WSmall and medium pouches
    PFS-450JT450 mm1250 WStandard retail bags
    PFS-600JT600 mm1500 WLarge bags and wider film
    PFS-800JT800 mm1800 WWide film and bag making

    The machine datasheet header lists the largest model as 850JT while the parameter table lists 800JT. The technical table is treated as the source of truth here, and the exact bar length for your order is confirmed in writing before production.

    Technical Data

    Datasheet: PFS Pedal Sealer Range

    The table below is taken from the machine parameter list for the full PFS range.

    Technical specifications of the PFS floor-standing foot sealing machine range
    ParameterPFS-350JTPFS-450JTPFS-600JTPFS-800JT
    Power supplyAC110-220V 60/50 Hz
    Power consumption1200 W1250 W1500 W1800 W
    Sealing size350 mm450 mm600 mm800 mm
    Dimensions880 x 550 x 250 mm880 x 550 x 250 mm880 x 550 x 250 mm720 x 550 x 250 mm
    Gross weight19 kg21 kg24.5 kg26 kg
    Heating methodElectric impulse heating
    CertificationCE
    Exclusive Diagram

    Impulse Heating in Four Steps

    The whole seal happens in the time it takes to release the pedal.

    01

    Film Is Placed

    The bag mouth is laid flat across the sealing bar with both hands, holding the film smooth.

    02

    Pedal Is Pressed

    A foot press closes the bar and starts the impulse timer, so the operator never reaches for a switch.

    03

    Bar Pulses

    Current flows for the set time only, melting the film layers together in a single controlled pulse.

    04

    Cool and Release

    The bar cools as the pedal is released, leaving a clean seam and a machine that is safe to touch.

    Core Strengths

    Simple, Tough and Quick to Use

    Four reasons this format is still the workhorse of hand-fed sealing.

    01

    High Sealing Efficiency

    The impulse cycle is short, so an operator can seal at a steady rhythm without waiting for the bar.

    02

    Hands-Free Pedal

    Foot operation keeps both hands on the bag, which improves alignment and reduces fatigue.

    03

    Two Jobs in One

    Seals filled bags and makes bags from film, so a small shop needs only one machine.

    04

    CE Certified

    Built to CE requirements, which simplifies selling sealed goods into regulated markets.

    Key Numbers

    The PFS Range at a Glance

    Four values that describe the whole series, from the smallest to the largest bar.

    800mmLongest seal bar
    1800WMaximum power
    4Seal lengths
    26kgHeaviest gross weight
    Where It Runs

    Workshops That Seal by Hand

    The floor-standing pedal sealer is at home anywhere bags are filled and closed in small or mixed batches.

    A

    Food

    Snacks, dried goods, grains and frozen items sealed in film bags on a packing bench.

    B

    Pharmaceutical

    Film bags and pouches for medical supplies, where a clean and consistent seal is essential.

    C

    Chemicals

    Powders, granules and small chemical packs sealed without generating much heat.

    D

    Light Industry

    Textiles, stationery and household goods bagged for retail and shipping.

    E

    Electronics

    Component bags and accessory packs sealed quickly in small batches.

    F

    Bag Making

    Short-run film converting where the bar both seals and separates the finished bag.

    FAQ

    PFS Foot Sealer Questions

    Match the bar to the widest bag you seal. The 350 mm model covers small and medium pouches, while the 450, 600 and 800 mm models step up for larger bags and bag-making work.

    An impulse sealer heats only during the seal cycle and then cools immediately. Nothing stays hot between bags, which suits intermittent hand-fed work rather than a continuously moving line.

    This is the floor-standing version, with a pedal that leaves both hands free to hold the bag. It stands on the floor and is operated by foot.

    Yes. The machine seals and cuts film for bag making as well as closing filled bags, which is why it is common in small film converting shops.

    The unit accepts AC110-220V at 50 or 60 Hz, so it works from common single-phase supplies. Power consumption is 1200W on the 350 mm model up to 1800W on the 800 mm model.

    Standard production takes about 5 working days. Air express adds roughly 4-6 working days, and larger orders can ship by air or sea freight.

    The machine carries a 2-year free warranty covering parts, with free replacement components and English online support for the life of the equipment.

    Related Models

    Other Foot-Operated Sealers

    Three models that share the pedal concept but change the format or add coding.

    See the full sealing machine range

    Next Step

    Tell Us the Widest Bag You Seal

    Send the bag width and film type. We will recommend the seal length, confirm the impulse setting and prepare a quotation for your workshop.

    Response Commitments

    • Reply within 12 working hours
    • Free sealing test on your film
    • Four bar lengths from one platform
    • 2-year warranty, lifetime support
    Get Quote