Vertical Ink Wheel Sealing Machine FRM-980LW
Adds a full ink wheel printing station for alphanumeric codes on larger film bags.
View model
Continuous Vertical Pouch Sealer
Vertical Film Bag Sealing Machine SF-150LW
A compact band sealer for small pouches. It prints, seals and conveys in one continuous movement, so a bag of snacks, powder or small parts goes from open to coded and closed in a single pass — with the air cushion sealed in to protect the contents.
0–24m/min speed
10 mmSeal width
0–300°CTemperature
23.5 kgNet weight
Small Pouch Specialists
A Small-Pouch Sealer That Keeps the Seam Neat
Small pouches are the hardest to seal well: the film is thin, the seam is short and the product sits close to the edge. A constant temperature band and a regulated drive keep the seal flat and even, so thin laminate does not curl or wrinkle as it leaves the heating zone.
- Seal after fillingWrapping the product with a sealed air cushion protects it in transit — the pouches travel well.
- Electronic constant temperatureThe controller holds the set point so the seam quality repeats across the batch.
- Speed-regulated driveThe take-off speed is tunable, letting thin and thick films run at their own rate.
- Date embossingA coding system can be fitted so the date is pressed into the seam as it forms.
Exclusive Diagram
Which Film Runs on This Sealer
Three film families cover almost every small pouch. Each one behaves differently at the seal.
| Film | Typical pouch | Behaviour at the seam |
|---|---|---|
| PE | General food and parts pouches | Seals at a low setting and gives a soft, even seam that resists tearing. |
| PP | Snacks, dried goods, stationery | Needs a slightly higher temperature and produces a crisp, clear seal line. |
| Aluminium foil laminate | Coffee, powders, medicine | Requires a firmer seal to bond the foil layer, giving a strong moisture barrier. |
Film thickness and coating vary between suppliers. Send a roll of your film and we will return a sealed and coded sample with the temperature and speed settings we used.
Technical Data
Datasheet: SF-150LW Settings Range
All values are taken from the machine datasheet for the standard SF-150LW build.
| Parameter | Specification |
|---|---|
| Model | SF-150LW |
| Power supply | 220V/50 Hz or 110V/60 Hz |
| Energy consumption | 60 W |
| Heating power | 280 W x 2 |
| Sealing speed | 0-24 m/min |
| Sealing width | 10 mm |
| Temperature range | 0-300 C |
| Conveyor load | 5 kg or less |
| Dimensions | 860 x 410 x 375 mm |
| Net / gross weight | 23.5 kg / 26.5 kg |
Exclusive Diagram
Date Coding in the Same Pass
The coding station sits on the same path as the seal, so no second machine is needed.
01
Pouch Is Loaded
The filled pouch is placed on the infeed guide with the mouth aligned to the band.
02
Characters Are Set
The embossing wheel is loaded with the date, lot or code and clipped into position.
03
Band Seals
Moving bands carry the pouch through the heating zone, softening the seal line evenly.
04
Code Is Pressed
The coding wheel presses the characters into the soft seam, printing and drying instantly.
Core Strengths
Compact, Repeatable, Easy to Re-Set
Four reasons this small sealer holds up on a busy pouch line.
01
Three Jobs in One
Printing, sealing and continuous conveying are combined, so the pouch never leaves the machine between steps.
02
Quick Character Change
Type is swapped in seconds, which keeps short runs and mixed batches moving.
03
Dual Orientation
Vertical or horizontal use means one machine covers both loose and standing pouches.
04
Bench Footprint
At 860 x 410 mm it fits a bench or trolley, so it can be moved to wherever the batch is running.
Key Numbers
The SF-150LW on One Line
The four values an operator checks before the first pouch of the shift.
24m/minTop band speed
10mmSeal width
300°CMaximum temperature
60WEnergy consumption
Where It Runs
Pouch Lines in Four Industries
Wherever a small pouch needs a clean seal and a readable code, this machine earns its bench space.
- Food and snacksNuts, dried fruit and confectionery pouches sealed with a printed best-before date.
- Pharmaceutical and healthSmall sachets and sample pouches coded with lot and expiry information.
- Daily chemicalsSample sachets and refill pouches for soaps, creams and cleaning products.
- Electronics and hardwareSmall parts, gaskets and accessories bagged and sealed with a batch code.
FAQ
SF-150LW Pouch Sealer Questions
PE, PP and aluminium foil laminates are all supported. The electronic constant temperature system lets you dial in a different setting for each film and repeat it on the next batch.
Yes. A date embossing system can be fitted so the code is pressed into the seal as it forms. Characters are easy to change and print and dry instantly, with no ink to smudge.
The SF-150LW is a dual-purpose model that seals with the pouch running vertically or horizontally, so the same machine suits loose product or a pouch standing on edge.
Sealing after filling traps a cushion of air in the pouch, which protects the contents during transport. That air cushion is one of the reasons small pouches travel so well.
An electronic constant temperature controller holds the set point across a 0-300 C range, and a speed-regulated drive keeps the pouch moving steadily through the heating zone.
Standard production takes about 5 working days. Air express adds roughly 4-6 working days, and the shipment is trackable from the factory.
The machine carries a 2-year free warranty. Failed parts are replaced free of charge within the period, and our engineers stay available for the life of the machine.
Related Models
Other Film Sealers to Consider
If your pouch is larger or your line is faster, these models step up from the SF-150LW.
Horizontal Continuous Sealing Machine SF-150W
The horizontal sibling of this machine, laid out for flat bags on a conveyor.
View model
Deluxe Horizontal Ink Wheel Sealing Machine FRD-980AI
A deluxe horizontal build with a cooling fan that stops thin film wrinkling at speed.
View model